PP Centrifugal Anti-corrosion Fans (Roof-mounted)

PP4-72 PP centrifugal blower. It has the characteristics of high strength, light weight, good corrosion resistance, not easy to age, and low noise. This series of blower blades using injection molding technology, the blower blades after injection molding are not only stronger and have higher anti-corrosion performance. Because the injection impeller achieves an effect that cannot be achieved by hand, the performance of the blower is more stable and the efficiency is higher. PP anti-corrosive centrifugal blower is suitable for discharging corrosive gases containing a certain concentration of acid, alkali, salt, etc. in chemical, textile, electroplating, laboratory and other places. It can also be used for ventilation of general factory buildings.

PP anti-corrosive centrifugal blowers are not allowed to be used to eliminate corrosive gases containing aromatic compounds, halogen derivatives of aliphatic and aromatic hydrocarbons, ketones and other corrosive gases. The use temperature of PP anticorrosive centrifugal blower is 0°C~60°C, and avoid sunlight exposure, and there should be no heat source near the site.

SPECIFICATION

DIMENSION (Unit: mm)